Daily Archives: June 1, 2020

Modeling Phase and Frequency Synchronization Error

Carrier phase or frequency synchronization is a common problem in wireless communication systems. These two problems are interrelated as instantaneous frequency is just the rate of change of phase. The problem of carrier frequency offset might appear due to one of two reasons. Either the oscillators at the transmitter and receiver are not aligned in the frequency domain or there is a Doppler shift introduced by the channel (remember that a moving object in the wireless environment introduces a Doppler shift). In the case of the former the frequency misalignment is given in parts per million (ppm). A typical value for commercially available oscillators is ±20 ppm. Assuming that there is maximum frequency error at both the transmitter and receiver the error increases to ±40 ppm. At 1GHz this translates to 40*1,000,000,000/1,000,000 = 40kHz.

Continue reading Modeling Phase and Frequency Synchronization Error